IGS-5408DSFP
8 10/100/1000T + 4 100/1000M SFP L2+ Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring
IGS-5408DSFP
8 10/100/1000T + 4 100/1000M SFP L2+ Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring
IGS-5408DSFP
8 10/100/1000T + 4 100/1000M SFP L2+ Industrial Managed Ethernet Switch w/ Enhanced G.8032 Ring
OVERVIEW
Lantech IGS-5408DSFP is a high performance L2+ (Gigabit uplink) switch with 8 10/100/1000T + 4 100/1000M SFP which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+**, SSH v2/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology.
Miss-wiring avoidance, Loop protection, Node failure protection
The IGS-5408DSFP also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IGS-5408DSFP is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Snooping is supported. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be supported.
User friendlyGUI, Auto topology drawing
The userfriendly UI, innovative auto topology drawing and topology demo makesIGS-5408DSFP much easier to get hands-on. The IGS-5408DSFP supports DMIinterface that can correspond with DDM SFPs (Digital diagnostic monitor) todisplay the five parameters in Lantech’s UI, including optical output power,input power, temperature, laser bias current and transceiver supply voltage***.The TX power/RX power raw data is automatically converted to dB values forinstaller, making it easier to calculate the fiber distance. The complete CLIenables professional engineer to configure setting by command line.
Enhanced G.8032 ring, 16 MSTI MSTP; MRP ring
Lantech IGS-5408DSFP features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring, multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows RSTP over VLAN for redundant links with 16 MSTI.
MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
QoS by VLAN for legacy device
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.
QinQ, QoS and GVRP supported
It supports the QinQ, QoS, GVRP for large VLAN segmentation.
802.1X security by MAC address
802.1x forauthenticating hosts connected to a port. By authenticating based on the host'ssource MAC address, the host is not required to run a user for the 802.1xprotocol. The RADIUS server that performs the authentication will inform theswitch if this MAC can be registered in the MAC address table of switch.
IGMPv3,GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The uniquemulticast protection under enhanced G.8032 ring can offer immediateself-recovery instead of waiting for IGMP table timeout. It also supportsIGMPv3, GMRP, router port, MLD snooping and static multicast forwarding bindingby ports for video surveillance application.
Editable configuration file; USB port for configuration upload & download
Theconfiguration file of Lantech IGS-5408DSFP can be exported and edited with wordprocessor for the other switches configuration with ease. The factory resetbutton can restore the setting back to factory default and built-in watchdogdesign can automatically reboot the switch when CPU is found dead.
The built-inUSB port can have configuration upload & download by USB dongle.
Event log & message; 2 DI + 2DO
In case of event, the IGS-5408DSFP is able to send an email to pre-defined addresses as well as SNMP Traps out immediately. It provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.
Optional environmental monitoring for switch inside information (-M model)
The environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps, email when abnormal
Wide input range 18~56VDC; EFT and ESD protection
The Lantech IGS-5408DSFP is designed with dual power supply at 24/48VDC. Featured with relay contact alarm function, the IGS-5408DSFP is able to connect with alarm system in case of power failure. The IGS-5408DSFP also provides ±2000V EFT/SURGE and ±4000 VDC (Contact) / ±8000 VDC (Air) Ethernet ESD protection, which can reduce unstable situation caused by power line and Ethernet.
Industrial hardened design for extended temperature operation
LantechIGS-5408DSFP features high reliability and robustness coping with extensiveEMI/RFI phenomenon, environmental vibration and shocks usually found infactory, substation, steel automation, aviation, mining and process control. Itis the best solution for Automation, transportation, surveillance, Wirelessbackhaul, Semi-conductor factory and assembly lines.
The -E modelcan be used in extreme environments with an operating temperature range of-40°C to 75°C.
FEATURES
- 8 10/100/1000T + 4 100/1000M SFP (Total 12 Ports Switch)
- Back-plane (Switching Fabric): 24Gbps
- 16K MAC address table
- DDM to support SFP diagnostic function***
- Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance
- 10KB Jumbo frame
- User friendly UI, auto topology drawing, topology demo, complete CLI for professional setting
- Enhanced G.8032 Ring protection in 20ms < 256 switches
- Support various ring/chain topologies, including train ring, enhanced ring, basic ring, auto ring & multiple VLAN ring
- Enhanced G.8032 ring configuration with ease
- Auto ring configuration(auto mode) for single ring
- Ring covers multicast on different ports
- Dual DC input from 18V~56VDC
- Ring storm control to cut off RPL line when RX threshold is over 85%
- Provides EFT protection ±2000 VDC for power line.
- Supports ±4000 VDC (Contact) and ±8000 VDC (Air) Ethernet ESD protection
- LACP load balancing to distribute the load*
- Built-in RTC (Real Time Clock) to keep track of time
- Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
- IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy with 16 MSTI
- 4K 802.1Q VLAN, Port based VLAN, GVRP, QinQ, QoS
- Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console
- DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server; Port based DHCP server; DHCP Snooping; DHCP Option 66; basic IPv6 DHCP server
- Mac based DHCP server to assign IP address
- MLD Snooping for IPv6 Multicast stream
- Bandwidth Control
- Ingress packet filter and egress rate limit
- Broadcast/multicast packet filter control
- Relay alarm output system events
- Miss-wiring avoidance
- LED indicator
- Node failure protection
- Ensure the switches in a ring to survive after power breakout is back
- The status can be shown in NMS when each switch is back
- TFTP/HTTP firmware upgrade; USB for edited restoration and auto backup
- System Event Log and SNMP Trap for alarm support; 32 RMON counters
- Security
- SSL/SSH v2/INGRESS/EGRESS ACL L2/L3
- MAC address table: MAC address entries/Filter/MAC-Port binding
- IP Security: IP address security management to prevent unauthorized intruder.
- Management access control with priority
- Login Security: IEEE802.1X/RADIUS
- HTTPS for secure access to the web interface
- TACACS+**
- Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application
- IGMP router port to assign query in ring for reversed multicast video flow
- Multicast VLAN registration* for metro video
- IGMPv1,v2,v3 with Query mode for multimedia; GMRP
- Factory reset button to restore setting to factory default
- Watchdog design to auto reboot switch CPU is found dead
- Diagnostic including Ping / DDM information
- Optional environmental monitoring for system input voltage, current, ambient temperature
- Supports DIDO (Digital Input/Digital Output)
- Configuration backup and restoration
- Supports editable configuration file for system quick installation
- USB port for upload / download configuration by USB dongle
- TFTP/HTTP firmware upgrade
- IP30 metal housing with DIN rail and Wall-mount** design
*Future Release
**Optional
***Optional DDM SFP required
SPECIFICATIONS
Hardware Specifications
Standards
|IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T Ethernet, IEEE802.3z Gigabit fiber, IEEE802.3x Flow Control and Back Pressure, IEEE802.3ad Port trunk with LACP, IEEE802.1d Spanning Tree, IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree, IEEE802.3ad Link Aggregation Control Protocol (LACP), IEEE802.1AB Link Layer Discovery Protocol (LLDP) , IEEE802.1X User Authentication (Radius), IEEE802.1p Class of Service, IEEE802.1Q VLAN Tag
| |Switch Architecture
|Back-plane (Switching Fabric): 24Gbps
| |Transfer Rate
|14,880pps for Ethernet port, 148,800pps for Fast Ethernet port, 1,488,000pps for Gigabit Ethernet / Gigabit Fiber port
| |Mac Address
|16K MAC address table
| |Jumbo frame
|10KB
| |Connectors
|10/100/1000T: 8 x ports RJ-45 with Auto MDI/MDI-X function, Mini-GBIC: 4 x 100/1000 SFP socket with DDM, RS-232 connector: RJ-45 type, USB for configuration restore/backup, Power & Relay connector: 1 x 6-pole terminal block, DIDO : 1 x 6-pole terminal block
| |Network Cable
|10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable, EIA/TIA-568 100-ohm (100m); 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable, EIA/TIA-568 100-ohm (100m); 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable, EIA/TIA-568 100-ohm (100m)
| |Optical Cable
|1.25Gbps: Multi mode: 0 to 550 m, 850 nm (50/125 μm); 0 to 2 km, 1310 nm (50/125 μm); Single mode: 0 to 10 km/ 30 km/ 40 km, 1310 nm (9/125 μm); 0 to 50 km/ 60 km/ 80km/ 120 km, 1550 nm (9/125 μm). 125Mbps: Multi mode: 0 to 2 km/ 5 km, 1310 nm (62.5/125 μm); Single mode: 0 to 30 km, 1310 nm (62.5/125 μm). WDM 1.25Gbps: Single mode: 0 to 10 km/ 20 km/ 40 km/ 60 km, 1310 nm (9/125 μm); 0 to 80 km, 1490 nm (9/125 μm); 0 to 10 km/ 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm). WDM 125Mbps: Single mode: 0 to 20 km/ 40 km/ 60 km/ 80 km, 1310 nm (9/125 μm); 0 to 20 km/ 40 km/ 60 km/ 80 km, 1550 nm (9/125 μm)
| |LED
|Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); Ethernet port: Link/Activity (Green), Speed (Green); Mini-GBIC: Link/Activity (Green); R.M. indicator (Green)
| |DI/DO
|2 Digital Input (DI): Level 0: -30~2V / Level 1: 10~30V, Max. input current: 8mA; 2 Digital Output (DO): Open collector to 40 VDC, 200mA
| |Operating Humidity
|5% ~ 95% (Non-condensing)
| |Operating Temperature
|-20°C~60°C / -4°F~140°F (Standard model), -40°C~75°C / -40°F~167°F (-E model)
| |Storage Temperature
|-40°C~85°C / -40°F~185°F
| |Power Supply
|Dual 18~56VDC (Standard model)
| |Power Consumption
|10W
| |Case Dimension
|Metal case. IP-30, 74 (W) x 105 (D) x 152 (H) mm
| |Weight
|900 g
| |Installation
|DIN Rail and Wall Mount** Design
| |EMI & EMS
|FCC Class A, CE EN55032, CE EN55024, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8, CE EN61000-6-2, BS EN55032, BS EN55024, BS EN61000-4-2, BS EN61000-4-3, BS EN61000-4-4, BS EN61000-4-5, BS EN61000-4-6, BS EN61000-4-8
| |Stability Testing
|IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-64 (Vibration)
| |Safety
|IEC/BS EN IEC 62368-1 2020/A11:2020
| |MTBF
|635,104 hours
| |Warranty
|5 years
|Software Specifications
Management
| [cite_start]SNMP v1 v2c, v3/ Web/Telnet/CLI [cite: 1]
| |SNMP MIB
| [cite_start]RFC 1213 MIBII, RFC 1158 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB*, RFC 1573 IF MIB, Partial RFC 1757 RMON, Private MIB [cite: 1]
| |ITU G.8032
|Support ITU G.8032 v2/2012 for Ring protection in less than 20ms for self-heal recovery (single mode). Support various ring/chain topologies. Includes train ring, auto ring, basic single ring, enhanced ring, multiple-VLAN ring. Enhanced G.8032 ring configuration with ease. Protect multicast & unicast data [cite: 1]
| |User friendly UI
|Auto topology drawing, Topology demo, DDM threshold with dB values***, Complete CLI for professional setting [cite: 1]
| |Port Trunk with LACP
|LACP Port Trunk: 8 Trunk groups [cite: 1]
| |LLDP
|Supports LLDP to allow switch to advise its identification and capability on the LAN [cite: 1]
| |CDP
|Cisco Discovery Protocol for topology mapping [cite: 1]
| |Environmental Monitoring**
| [cite_start]System status for input voltage, current and ambient temperature to be shown in GUI and sent alerting if any abnormal status (-M models) [cite: 1]
| |VLAN
|Port Based VLAN, IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096), GVRP, QinQ, Protocol based VLAN; [cite_start]IPv4 Subnet based VLAN [cite: 1]
| |Spanning Tree
| [cite_start]Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree [cite: 1]
| |Quality of Service
| [cite_start]The quality of service determined by port / CoS / ToS / VLAN / 61375-3-4 [cite: 1]
| |Class of Service
| [cite_start]Support IEEE802.1p class of service, per port provides 8 priority queues [cite: 1]
| |MLD Snooping
| [cite_start]Support IPv6 Multicast stream [cite: 1]
| |Login Security
| [cite_start]Supports IEEE802.1X Authentication/RADIUS [cite: 1]
| |Port Mirror
| [cite_start]Support 3 mirroring types: “RX, TX and Both packet” [cite: 1]
| |Network Security
|Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. 802.1X access control for port based and MAC based authentication/MAC-Port binding. Management access control with priority. Ingress/Egress ACL L2/L3. SSL/ SSH v2 for Management. HTTPS for secure access to the web interface. [cite_start]TACACS+** for Authentication [cite: 1]
| |IGMP
|Support IGMP snooping v1, v2, v3; 1024 multicast groups; IGMP router port; IGMP query; [cite_start]GMRP* [cite: 1]
| |Static MAC-Port Bridge
| [cite_start]Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application [cite: 1]
| |Bandwidth Control
|Support ingress packet filter and egress packet limit. The egress rate control supports all of packet type. Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet. [cite_start]The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress packet limit [cite: 1]
| |RTC
| [cite_start]Built-in Real Time Clock to keep track of time always [cite: 1]
| |Flow Control
| [cite_start]Supports Flow Control for Full-duplex and Back Pressure for Half-duplex [cite: 1]
| |System Log
| [cite_start]Supports System log record and remote system log server [cite: 1]
| |SMTP**
| [cite_start]Supports SMTP** Server and 8 e-mail accounts for receiving event alert [cite: 1]
| |Relay Alarm
|Provides one relay output for port breakdown, power fail and alarm. Alarm Relay current carry ability: 1A @ DC24V [cite: 1]
| |Protection
|Miss-wiring avoidance, Node failure protection, Loop protection, Ring Storm control cut off RPL line when threshold is over 85% [cite: 1]
| |SNMP Trap
|Up to 10 trap stations; trap types including: Device cold start, Authorization failure, Port link up/link down, DI/DO open/close, Typology change(ITU ring), Power failure, Environmental abnormal** [cite: 1]
| |DHCP
|Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Option 66; [cite_start]DHCP Snooping; basic IPv6 DHCP server [cite: 1]
| |Mac based DHCP Server
| [cite_start]Assign IP address by Mac [cite: 1]
| |DNS
| [cite_start]Provide DNS client feature [cite: 1]
| |Diagnostic
| [cite_start]Support Ping and DDM information [cite: 1]
| |SNTP
| [cite_start]Supports SNTP to synchronize system clock in Internet [cite: 1]
| |Firmware Update
|Supports TFTP firmware update, TFTP backup and restore; [cite_start]HTTP firmware upgrade [cite: 1]
| |Configuration upload and download
|Supports text configuration file for system quick installation; Support factory reset button to restore all settings back to factory default; [cite_start]USB port for upload/download configuration by USB dongle [cite: 1]
|*Future Release
**Optional
***Optional DDM SFP required
ORDERING INFORMATION
OPTIONAL ACCESSORIES - DIN Rail Power
OPTIONAL ACCESSORIES - Mini GBIC (SFP)