IPGS-0016
16 10/100/1000T PoE at/af Industrial Unmanaged Ethernet Switch
OVERVIEW
Lantech IPGS-0016 is a high performance 16 10/100/1000T industrial Ethernet switch with w/16 PoE 802.3af/at ports.
Galvanic isolation for dual 24V/48V wide input range
The IPGS-0016 supports IEEE802.3af/at standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, high power wireless AP etc.
The IPGS-0016-24V accepts power input 9~36VDC and is compliant with ISO 7637-2 which protects switch from being damaged by high voltage that could be found at vehicle cranky start.
48V model accept 45~56VDC power input and can feed 48V output for PoE feeding in vehicle at max 240W @48V input.
E-marking certificate, High reliability and extended working temperature
Lantech IPGS-0016 provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, Wireless backhaul, Semi-conductor factory and assembly lines.
The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
The E-marking certificate makes it the most suitable switch for bus, carriage, other vehicles application as well as for industrial areas.
FEATURES
- 16 10/100/1000T industrial Ethernet switch w/16 PoE 802.3af/at ports (Total 16 Ports Switch)
- PoE budget 100W at 24V input; 240W at 48V input
- Dual 9V~36VDC with ISO7637-2 compliance (24V model)
- Dual 44~56VDC input (48V model)
- Back-plane (Switching Fabric): 32Gbps
- Provides EFT protection ±2000 VDC for power line
- Supports ±6000 VDC Ethernet ESD protection
- Galvanic isolation between power input and system/case ground; between Ethernet port and system/case ground; between power input and Ethernet port
- E-marking certificate for vehicle application (-24V model)
- Relay alarm output for power fail and alarm
- IP30 metal housing with DIN rail and Wall-mount** design
SPECIFICATIONS
Hardware Specifications
Standards
|IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3x Flow Control and Back Pressure
IEEE802.3af/at Power over Ethernet
Switch Architecture
|Back-plane (Switching Fabric): 32Gbps
| |Transfer Rate
|14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Mac Address
|16K MAC address table
| |Connectors
|10/100/1000T: 16 x ports RJ-45 with Auto MDI/MDI-X function
Power & P-Fail connector: 1 x 6-pole terminal block
Network Cable
|10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
LED
|Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red);
Ethernet port: Link/Activity (Green)
Operating Humidity
|5% ~ 95% (Non-condensing)
| |Operating Temperature
|-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F(-E model)
Storage Temperature
|-40°C~85°C / -40°F~185°F
| |Power Supply
|Dual 9~36VDC (24V model)
Dual 44~56VDC (48V model)
PoE Budget
|240W at 48V input (50-56VDC input is recommended for 802.3at 30W applications); 100W at 24V input; 80W at 12V input
Higher PoE budget can be applied upon request. **
PoE pin assignment
|RJ-45 port # 1~#16 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides up to 30W. (-14 model RJ-45 port # 1~#14 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides up to 30W)
Positive (VCC+): RJ-45 pin 1,2
Negative (VCC-): RJ-45 pin 3,6
Power Consumption
|15W exclude PoE loads
| |Galvanic Isolation
|Between power input and system/case ground
Between Ethernet port and system/case ground
Between power input and Ethernet port
Case Dimension
|Metal case IP-30
74 (W) x 105 (D) x 152 (H) mm
Weight
|900 g
| |Installation
|DIN Rail and Wall Mount** Design
| |Relay Alarm
|Provides one relay output for power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V
EMI & EMS
|FCC Class A, CE EN55011,
CE EN55032, CE EN55024,
CE EN61000-4-2, CE EN61000-4-3,
CE EN61000-4-4, CE EN61000-4-5,
CE EN61000-4-6, CE EN61000-4-8,
CE EN61000-6-2, CE EN61000-6-4
Safety
|IEC/BS EN IEC 62368-1 2020/A11:2020
| |Vehicle certificate
|E-Marking with E13 granted approval (-24V model) Power input range 16.8~36VDC
| |MTBF
|908,270 hrs (standards: IEC 62380)
|*Future Release **Optional
ORDERING INFORMATION
All part no. with WALL are models with wall mount kit instead of DIN Rail
| IPGS-0016-24V | 16 10/100/1000T w/16 PoE at/af up to 30W Industrial Ethernet Switch; dual 9~36VDC input; compliant with ISO7637-2; -20°C to 60°C |
| 8351-1261 | IPGS-0016-14-24V | 16 10/100/1000T w/14 PoE at/af up to 30W Industrial Ethernet Switch; dual 9~36VDC input; compliant with ISO7637-2; -20°C to 60°C |
| 8351-1262 | IPGS-0016-48V | 16 10/100/1000T w/16 PoE at/af up to 30W Industrial Ethernet Switch; dual 44~56VDC input; -20°C to 60°C |
| 8351-1263 | IPGS-0016-14-48V | 16 10/100/1000T w/14 PoE at/af up to 30W Industrial Ethernet Switch; dual 44~56VDC input; -20°C to 60°C |
| 8351-127 | IPGS-0016-24V-E | 16 10/100/1000T w/16 PoE at/af up to 30W Industrial Ethernet Switch; dual 9~36VDC input; compliant with ISO7637-2; -40°C to 75°C |
| 8351-1271 | IPGS-0016-14-24V-E | 16 10/100/1000T w/14 PoE at/af up to 30W Industrial Ethernet Switch; dual 9~36VDC input; compliant with ISO7637-2; -40°C to 75°C |
| 8351-1272 | IPGS-0016-48V-E | 16 10/100/1000T w/16 PoE at/af up to 30W Industrial Ethernet Switch; dual 44~56VDC input; -40°C to 75°C |
| 8351-1273 | IPGS-0016-14-48V-E | 16 10/100/1000T w/14 PoE at/af up to 30W Industrial Ethernet Switch; dual 44~56VDC input; -40°C to 75°C |