SFP 125Mbps (1310nm)

125Mbps~155Mbps, 1310nm, 100Base SFP Transceiver

No items found.
Back to All

OVERVIEW

Lantech 100Base Small Form Factor Pluggable (SFP) transceiver module series is specifically designed for the high performance integrated duplex data link over single-mode or multi-mode optical fiber. These transceiver modules are compliant with the SFP Multisource Agreement (MSA). With the hot pluggability, these modules offer an easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.


Lantech 100Base SFP transceivers using a long wavelength (1310nm) enable data transmission up to 60km on a single-mode optical fiber or up to 5km on a multimode optical fiber.


FEATURES

  • SFP Multi-Source Agreement compliant
  • Serial ID functionality support
  • AC-coupled differential inputs and outputs
  • Class 1 laser safety standard IEC 60825 compliant
  • Low power dissipation

SPECIFICATIONS

Absolute Maximum Ratings

|

Parameter

|

Symbol

|

Min.

|

Max.

|

Unit

|

Note

| | --- | --- | --- | --- | --- | --- | |

Storage Temperature

|

Ts

|

-40

|

+85

|

°C

|

 

| |

Supply Voltage

|

VccT, VccR

|

-0.5

|

4.0

|

V

|

 

| |

Storage Relative Humidity

|

RH

|

5

|

95

|

%

|

 

|

Recommended Operating Conditions

|

Parameter

|

Symbol

|

Min.

|

Typ.

|

Max.

|

Unit

|

Note

| | --- | --- | --- | --- | --- | --- | --- | |

Case Operating Temperature

|

Tc

|

-10

|

 

|

70

|

°C

|

 

| |

Supply Voltage

|

Vcc

|

3.1

|

3.3

|

3.5

|

V

|

 

| |

Supply Current

|

ITX + IRX

|

 

|

150

|

300

|

mA

|

Max. 250 for 5km model
Max. 240 for 60km model

|

Receiver Electro-Optical Interface

|

Parameter

| |

Symbol

|

Min.

|

Typ.

|

Max.

|

Unit

|

Note

| | --- | --- | --- | --- | --- | --- | --- | --- | |

Receiver Differential Output Voltage

| |

RD +/-

|

400

|

 

|

2000

|

mV

|

Min. 300, Max. 1000 for 60km model

| |

Receiver Overload

|

2km

|

PINMAX

|

-8

|

 

|

 

|

dBm

|

1, 2

| | |

5km

| |

0

| | | | | | |

30km

| |

-5

| | | | | | |

60km

| |

-3

| | | | | |

Receiver Sensitivity

|

2km

|

PINMIN

|

 

|

 

|

-32

|

dBm

|

1, 2

| | |

5km

| | | |

-30

| | | | |

30km

| | | |

-34

| | | | |

60km

| | | |

-34

| | | |

Operating Center Wavelength

| |

λC

|

1260

|

 

|

1620

|

nm

|

Max. 1600 for 5km model

| |

Receiver Loss of Signal – TTL Low

|

2km

|

PRX_LOSD

|

 

|

 

|

-32

|

dBm

|

 

| | |

5km

| | | |

-30

| | | | |

30km

| | | |

-35

| | | | |

60km

| | | |

-34

| | | |

Receiver Loss of Signal –
TTL High

| |

PRX_LOSA

|

-45

|

 

|

 

|

dBm

|

Min. -46 for 60km model

| |

Receiver Loss of Signal - Hysteresis

| |

PRX_LOSH

|

0.5

|

 

|

 

|

dB

|

Min. 1.0 for 5km model

|

Notes:  1. (For 2/5/30km models) With BER better than or equal to 1×10-12, measured in the center of the eye opening with 27 –1 PRBS

Notes:  2. (For 60km model) Measured with a PRBS 223 –1 test pattern @155Mbps BER<10-10

Transmitter Electro-Optical Interface

|

Parameter

| |

Symbol

|

Min.

|

Typ.

|

Max.

|

Unit

|

Note

| | --- | --- | --- | --- | --- | --- | --- | --- | |

Transmitter Differential Input Voltage

| |

TD +/-

|

400

|

 

|

2400

|

mV

|

Min. 300, Max. 1600 for 60km model

| |

Tx_Fault - High

| |

VFault_H

|

2

|

 

|

Vcc

|

V

|

 

| |

Tx_Fault - Low

| |

VFault_L

|

Vee

|

 

|

Vee+0.8

|

V

|

 

| |

Tx_Disable - High

| |

VDisable_H

|

2

|

 

|

Vcc

|

V

|

 

| |

Tx_Disable - Low

| |

VDisable_L

|

Vee

|

 

|

Vee+0.8

|

V

|

 

| |

Optical Output Power

|

2km

|

PO

|

-20

|

 

|

-14

|

dBm

|

1

| | |

5km

| |

-9

| |

0

| | | | |

30km

| |

-15

| |

-8

| |

 

| | |

60km

| |

-5

| |

0

| |

2

| |

Optical Extinction Ratio

|

2km

|

ER

|

10

|

 

|

 

|

dB

|

 

| | |

5km

| |

8.2

| | | | | | |

30km

| |

8.2

| | | | | | |

60km

| |

10

| | | | | |

Center Wavelength

|

2km

|

λC

|

1270

|

 

|

1380

|

nm

|

 

| | |

5km

| |

1261

| |

1360

| | | | |

30km

| |

1261

| |

1360

| | | | |

60km

| |

1280

|

1310

|

1340

| | | |

Spectral Width

|

2km

|

Δλ

|

 

|

 

|

7.7

|

nm

|

 

| | |

5km

| | | |

7

| | | | |

30km

| | | |

4

| | | | |

60km

| | | |

2

| | | |

Optical Rise / Fall Time

|

2km

|

tr / tf

|

 

|

 

|

3.0

|

ns

|

2, 3

| | |

5km

| | | |

2

| | | | |

30km

| | | |

2

| | | | |

60km

| | | |

2

| | |

Notes:  1. Coupling into a 62.5/125μm, NA=0.275 fiber. 2. The optical power is launched into a 9/125μm single-mode fiber 3. 10% to 90% value (2/5/30km models) 4. 20% to 80% value (60km model)

MTBF

|

 

|

60% Confidence Level, 25°C

| |

90% Confidence Level, 25°C

| | | --- | --- | --- | --- | --- | | |

MTBF

|

FIT

|

MTBF

|

FIT

| |

2km

|

1627052

|

615

|

650821

|

1537

| |

5km

|

1627052

|

615

|

650821

|

1537

| |

30km

|

1627052

|

615

|

650821

|

1537

| |

60km

|

813526

|

1229

|

325410

|

3073

|
No items found.

ORDERING INFORMATION

|

Part Number

|

Wavelength

|

LD

|

IO

|

LOS

|

Mode

|

Link

|

Temp.

| | --- | --- | --- | --- | --- | --- | --- | --- | |

8330-060D-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Multi-mode

|

2km

|

-10~70°C

| |

8330-065D-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Multi-mode

|

5km

|

-10~70°C

| |

8330-061D-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Single-mode

|

30km

|

-10~70°C

| |

8330-059D-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Single-mode

|

60km

|

-10~70°C

| |

8330-060DE-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Multi-mode

|

2km

|

-40~85°C

| |

8330-065DE-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Multi-mode

|

5km

|

-40~85°C

| |

8330-061DE-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Single-mode

|

30km

|

-40~85°C

| |

8330-059DE-V1

|

1310nm

|

FP

|

AC/AC

|

TTL

|

Single-mode

|

60km

|

-40~85°C

|