SFP 125Mbps (1310nm) – Lantech Communications Europe

SFP-125Mbps (1310nm)

125Mbps~155Mbps, 1310nm, 100Base SFP Transceiver

Distance: 2km, 5km, 30km
Standard Operating Temperature: -10°C ~ 70°C
Wide Operating Temperature: -40°C ~ 85°C

OVERVIEW

Lantech 100Base Small Form Factor Pluggable (SFP) transceiver module series is specifically designed for the high performance integrated duplex data link over single-mode or multi-mode optical fiber. These transceiver modules are compliant with the SFP Multisource Agreement (MSA). With the hot pluggability, these modules offer an easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online.

Lantech 100Base SFP transceivers using a long wavelength (1310nm) enable data transmission up to 30km on a single-mode optical fiber or up to 5km on a multimode optical fiber.

FEATURES

SPECIFICATIONS

Specifications

Absolute Maximum Ratings

Parameter	Symbol	Min.	Max.	Unit	Note
Storage Temperature	Ts	-40	+85	°C
Supply Voltage	VccT, VccR	-0.5	4.0	V
Storage Relative Humidity	RH	5	95	%

Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Case Operating Temperature	Tc	-10		70	°C
Supply Voltage	Vcc	3.1	3.3	3.5	V
Supply Current	ITX + IRX		150	300	mA	Max. 250 for 5km model

Receiver Electro-Optical Interface

Parameter		Symbol	Min.	Typ.	Max.	Unit	Note
Receiver Differential Output Voltage		RD +/-	400		2000	mV
Receiver Overload	2km	PINMAX	-8			dBm	1
	5km		0
	30km		-5
Receiver Sensitivity	2km	PINMIN			-32	dBm	1
	5km				-30
	30km				-34
Operating Center Wavelength		λC	1260		1620	nm	Max. 1600 for 5km model
Receiver Loss of Signal – TTL Low	2km	PRX_LOSD			-32	dBm
	5km				-30
	30km				-35
Receiver Loss of Signal – TTL High		PRX_LOSA	-45			dBm
Receiver Loss of Signal – Hysteresis		PRX_LOSH	0.5			dB	Min. 1.0 for 5km model
Notes: 1. With BER better than or equal to 1×10-12, measured in the center of the eye opening with 27 –1 PRBS

Transmitter Electro-Optical Interface

Parameter		Symbol	Min.	Typ.	Max.	Unit	Note
Transmitter Differential Input Voltage		TD +/-	400		2400	mV
Tx_Fault – High		VFault_H	2		Vcc	V
Tx_Fault – Low		VFault_L	Vee		Vee+0.8	V
Tx_Disable – High		VDisable_H	2		Vcc	V
Tx_Disable – Low		VDisable_L	Vee		Vee+0.8	V
Optical Output Power	2km	PO	-20		-14	dBm	1
	5km		-9		0
	30km		-15		-8
Optical Extinction Ratio	2km	ER	10			dB
	5km		8.2
	30km		8.2
Center Wavelength	2km	λC	1270		1380	nm
	5km		1261		1360
	30km		1261		1360
Spectral Width	2km	Δλ			7.7	nm
	5km				7
	30km				4
Optical Rise / Fall Timet	2km	tr / tf			3.0	ns	2
	5km				2
	30km				2
Notes: 1. Coupling into a 62.5/125μm, NA=0.275 fiber. 2. 10% to 90% value

MTBF

	60% Confidence Level, 25°C		90% Confidence Level, 25°C
	MTBF	FIT	MTBF	FIT
2km	1627052	615	650821	1537
5km	1627052	615	650821	1537
30km	1627052	615	650821	1537

ORDER INFORMATION

Part Number	Wavelength	LD	IO	LOS	Mode	Link	Temp.
8330-060	1310nm	FP	AC/AC	TTL	Multi-mode	2km	-10~70°C
8330-060XE	1310nm	FP	AC/AC	TTL	Multi-mode	2km	-40~85°C
8330-065	1310nm	FP	AC/AC	TTL	Multi-mode	5km	-10~70°C
8330-065-E	1310nm	FP	AC/AC	TTL	Multi-mode	5km	-40~85°C
8330-061	1310nm	FP	AC/AC	TTL	Single-mode	30km	-10~70°C
8330-061XE	1310nm	FP	AC/AC	TTL	Single-mode	30km	-40~85°C