16 10/100TX + 4 GigaT X-coded L2+ (8/16 PoE at/af) EN50155 Managed Ethernet Switch w/Enhanced G.8032 Ring

  •  EN50155/61373/45545-2 verification
  •  IEEE802.3at/af up to 30W per port; PoE management incl. detection and scheduling (For PoE Model)
  •  Optional 24V input can boost to 54V output PoE max. 120W; optional WV input supports PoE output max.120W (For PoE Model)
  •  Optional bypass in case of power failure, watchdog hang (BT models)
  •  Enhanced G.8032 ring protection < 20ms for single ring. Supports auto mode, enhanced mode, train mode, multi-VLAN and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 16MSTI /RSTP
  •  Miss-wiring avoidance & node failure protection
  •  User friendly UI, including auto topology drawing; Complete CLI
  •  Support LACP link aggregation, IGMP v3/router port, MLD snooping, DHCP server & DHCP Option82; DHCP Snooping, Port based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH v2/SSL, HTTPS, INGRESS/EGRESS ACL L2/L3, TACACS+**, QinQ
  •  User friendly UI, including auto topology drawing; Complete CLI
  •  Environmental Monitoring for temp., input voltage, current & PoE total load
  •  Protocol based VLAN; IPv4 Subnet based VLAN
  •  N-key configurator** for upgrading, auto/editable configuration back up and restoration without computer; good for multiple switches
 

Lantech T(P)ES-5416T (IP67/IP54) is a high performance L2+ (Gigabit uplink) EN50155 Ethernet switch with 16 10/100TX + 4 10/100/1000T (total 20 ports) (w/8/16 PoE 802.3af/at) ports by M12 provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+**, SSH v2/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.

DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Snooping is supported. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be supported.

Wide input range model (WV) w/maximum PoE budget
The Lantech T(P)ES-5416T is designed with dual power input ranges from 16.8~137.5VDC. The WV model can accept dual 16.8~137.5VDC to feed 54V PoE to provide PoE budget max 120W. 24V model can accept dual 9~56VDC to feed 54V PoE to provide PoE budget max. 120W. (for PoE model) Featured with relay contact alarm function, the T(P)ES-5416T (IP67/IP54) is able to connect with alarm system in case of power failure or port disconnection events.

User friendly GUI, Auto topology drawing
The user-friendly UI, innovative auto topology drawing and topology demo makes T(P)ES-5416T (IP67/IP54) much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.

Enhanced G.8032 ring, 16 MSTI MSTP; MRP ring
Lantech T(P)ES-5416T (IP67/IP54) features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 16 MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks.

Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5 TBN
Lantech OS1 Ethernet switches comply with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (TBN).

QoS by VLAN for legacy device
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.

QinQ, QoS and GVRP supported
It supports the QinQ, QoS and GVRP for large VLAN segmentation.

IGMPv3, GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD snooping and static multicast forwarding binding by ports for video surveillance application.

PoE +, Advanced PoE management
Lantech T(P)ES-5416T (IP67/IP54) supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The advanced PoE management includes PoE detection and scheduling besides the regular PoE per port status. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Per port PoE status can remotely On/Off the power and display information of voltage, current, watt and PoE temperature. (For PoE Model)

Node failure protection, Miss-wiring alert, Loop protection
The T(P)ES-5416T (IP67/IP54) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech T(P)ES-5416T (IP67/IP54) is able to alert with the LED indicator and send out an email** or traps. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

Optional hardware bypass on Giga Copper ports
The optional hardware bypass function provides redundant GigaT connection when power or switch fails in a ring or bus structure. The bypass replay is set to bypass the switch to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. The bypass is also activated when detecting the CPU watchdog is ON.

Editable configuration file; Optional N key auto backup, exported text file
The configuration file can also be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The built-in watchdog design can automatically reboot the switch when CPU is found dead. The optional N-key configurator offers firmware upgrade, auto/editable configuration back up and restoration without computer by adjusting the DIP switch.

Event email** and trap; 1DI+1DO
In case of event alarm, the T(P)ES-5416T (IP67/IP54) is able to send an email** to pre-define addresses as well as SNMP Traps out immediately. It provides 1DI and 1DO when disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

Built-in environmental monitoring
The built-in environmental monitoring can detect switch total PoE load, overall temperature, voltage, total PoE load and current where can send the SNMP traps and email** when abnormal.

EN50155, EN50121, EN61373 & EN45545 verification; High ESD protection
Lantech T(P)ES-5416T (IP67/IP54) features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines. The T(P)ES-5416T (IP67/IP54) is designed to meet with critical network environment with IP67/IP54 aluminum enclosure and M12 connectors for water proof. With EN45545-2 Fire & Smoke, and EN50155 & EN61373 verification, the T(P)ES-5416T (IP67/IP54) is best for railway in train/track side, vehicle and mining applications. For more usage flexibilities, T(P)ES-5416T (IP67/IP54) supports wide operating temperature from -40°C to 75°C. T(P)ES-5416T (IP67/IP54) also provides ±2000V EFT and ±6000V ESD contact protection, which can reduce unstable situation caused by power line and Ethernet.

*Future release
**Optional