Industrial Multifunction VPN Router w/up to 2 LTE 4G + 2 serial ports + 2 Gigabit Ethernet (incl.1 PD) w/Load Balancing, VPN, Protocol Gateway, Storage**; 24V input

  • Up to 2 concurrent modems for 3G/4G LTE Link & GPS(2L model/4 SIMs)
  • Built-in 2 Gigabit Ethernet ports (1LAN+1WAN or 2LAN) (incl. 1PD)
  • Support LTE Cat 6 (APAC & EUNA models) or Cat 12/9/13 (WW model)
  • VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE
  • Optional EMMC Flash storage on-board**
  • Optional eSIM chip enables router with versatile data plans**
  • Load Balancing built-in 5 mechanism
  • Support NAT and Firewall
  • Support Modbus gateway
  • Support 2 RS422/RS485 ports or 2x RS232 ports
  • Dual Input voltage 9~56VDC (24V model)
  • Vehicle E-marking** certificate (M12 model)
  • LTE graphic signal strength
  • Editable login page of captive portal for hot-spot application
  • ITxPT design w/ ignition function**
  • USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware
  • EN50155/61373/45545 verification for railway application (except 24V-IGN model)
 
Datasheet
Manual
123

OVERVIEW

Lantech IMR-3002 series is a next generation industrial multi-function VPN router w/ up to 2x LTE modem + 2x Gigabit Ethernet (incl.1 PD) + 2 serial ports that supports advanced function of VPN, Load-balancing, Protocol gateway(Modbus), EMMC Flash Storage**, and LTE quad SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Dual concurrent LTE design 4G/3G for load-balancing
With dual LTE module design (2L model), 4 SIM card slots, IMR-3002 can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also allocate bandwidth by “ Load Balancing with 8 schemes between multiple WANs.

With one mobile LTE module, 2 SIM card slots, IMR-3002-1L provides redundant link between two service providers.

Both GPS and Russian GLONASS systems are supported.

Load Balancing with 5 mechanisms for multi-WANs
IMR-3002 supports Load Balancing for LTE/WAN (client mode) connections. There are five schemes for Load Balancing function:

Pack Algorithm Description
Basic Fixed All traffic will be distributed to a single WAN.
Failover Routes connections through preferred WAN link while others stand-by. Sequentially activating another link if the preferred link fails.
Priority Select the active WAN according to priority.
Weighted Round-Robin Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
Custom Route Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.

2 port serial connection, Modbus gateway
It builds in 2 port serial connection for RS232, RS422, RS485.

The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

Optional EMMC Flash storage**
The optional EMMC flash storage on the router can offer 8G/16G/32G capacity.

Optional eSIM**
By replacing physical SIM, optional eSIM chip will allow users to purchase data plans at low prices from local carriers in the world.

VPN and firewall
Besides traditional VPN peer to peer tunneling, IMR-3002 support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe.

It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE, and NAT for various VPN applications.

The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number

Email notice; Event log; Remote Web control

In case of events, the IMR-3002 will immediately send email and trap. The event log can be sent via syslog, emails or trigger the alarm relay. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot by Web.

24V isolated input voltage selection: dual 9V-56VDC (24V model)
The IMR-3002 is able to work from 9VDC to 56VDC (24V model).

Two port Gigabit Ethernet can be supported as 1LAN+1WAN or 2LAN models.

USB port for back up, restore configuration and upgrade firmware; Dual image firmware
The built-in USB port can upload/download the configuration through USB dongle for router replacement.

It supports dual-image firmware to choose which one to start.

Dual image firmware
It supports dual-image firmware to choose which one to start.

Ruggedized industrial design and FCC, CE certificate
The IMR-3002 is designed to meet with outdoor network environment with IP30 (IP43 for M12 model) housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for LTE, the IMR-3002 is best for outdoor community, vehicle, and process control automation applications. For more usage flexibilities, IMR-3003 supports wide operating temperature from -40°C to 65°C.

EN50155, EN61373 verification; E-marking** certification; ITxPT** design
The IMR-3002 series is also applicable for railway on-board/track side, vehicle and mining applications for more usage flexibilities. The series is verified with EN50155, EN61373, and EN45545 for railway applications (Except 24V-IGN model). The E-marking certificate (24V model) and ITxPT design (24V-IGN model).

Ignition Sensing*
Ignition sense allows you to delay power off your Ethernet switch with a designated time delay.

*Future Release
**Optional