IPES-0104GT-4 – Lantech Communications Europe

4 10/100TX PoE at/af + 1 10/100/1000T Industrial Unmanaged Switch

Complies with IEEE802.3at/af PoE standard
Redundant power supply with overload current protection
Wide operating temperature range from -40°C to 75°C (-E model)
Support 12V to 48V DC booster design for vehicle application(12V model)
High power provides up to 30W output per port

VERVIEW

The Lantech IPES-0104GT-4 is a 4-port 10/100TX + 1 GigaT with 4 PoE Injector Industrial PoE at/af Switch for plug-and-play installation. This slim switch is designed with Wall-mountable** or DIN rail mountable, making installation more easy.

Besides redundant power supply with overload current protection, the IPES-0104GT-4 provides ±2000V EFT/SURGE and ±6000 VDC (Contact) / ±8000 VDC (Air) Ethernet ESD protection, which can reduce unstable environment damage caused by power line and Ethernet. Featured with relay contact to alarm system function, the IPES-0104GT-4 can immediately notify of power failure event.

The IPES-0104GT-4 is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.

The Lantech IPES-0104GT-4 is the best Industrial switch to connect with IP Camera, Wireless Equipments where are placed outdoor or in tight space cabinet. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.

The IPES-0104GT-4 supports the high power PoE standard which provides higher power output up to 30W per port for devices that require higher power supply.

With voltage boost design, the IPES-0104GT-4-12V can work from 12/24V input power source and boost the voltage to 48VDC to feed the POE power over Ethernet cable for any vehicles that usually has 12/24V power source. The slim compact design is able to fit in variety of cabinets and space.

**Optional

FEATURES

System Interface/Performance
- RJ-45 port support Auto MDI/MDI-X Function
- Embedded 4-port PoE Injector Function
- Store-and-Forward Switching Architecture
- Back-plane (Switching Fabric): 2.8Gbps
- 8K MAC address table
Supports Wide Operating Temperature (-40°C~75°C)
IP-30 Metal Housing with DIN Rail and Wall Mount** Design
Power Supply
- DC44~56V dual input (48V model)
- DC9.5V~56V dual input (12V model)
Provides EFT protection ±2000 VDC for power line
Supports ±6000 VDC (Contact) and ±8000 VDC (Air) Ethernet ESD protection
Relay output for power fail and alarm
Built-in 12 to 48V DC-DC converter for PoE(12V model)

**Optional

SPECIFICATIONS

Hardware Specifications

IEEE Standards	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE802.3ab 1000Base-T IEEE802.3x Flow Control and Back Pressure IEEE802.3at/af Power over Ethernet
Switch Architecture	Back-plane (Switching Fabric): 2.8Gbps
Transfer Rate	14,880pps for Ethernet port 148,800pps for Fast Ethernet port 1,488,000pps for Gigabit Ethernet / Gigabit Fiber port
MAC Address	8K MAC address table
Connectors	10/100TX: 4 x RJ-45 with auto MDI/MDI-X function 10/100/1000T: 1 x RJ-45 with auto MDI/MDI-X Support 4 PoE injector function
Network Cable	10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable EIA/TIA-568 100-ohm (100m)
PoE PIN Assignment	RJ-45 port #1 – #4 support IEEE 802.3af End-point; Alternative A mode. Positive (VCC+): RJ-45 pin 1,2 Negative (VCC-) : RJ-45 pin 3,6 Data (1,2,3,6)
Protocol	CSMA/CD
Case Dimension	IP-30, 12V model: 43(W) x 105(D) x 152(H) mm 48V model: 35(W) x 105(D) x 152(H) mm
Weight	800g
LED	Per unit: Power 1 (Green), Power 2 (Green), Fault (Red) 4 port 10/100TX: Link/Activity (Green), PoE (Yellow) 1 port 10/100/1000T: Link/Activity(Green), Full duplex/Collission(Yellow)
Power Supply	44~56VDC dual input for 48V model; 9.5V~56VDC dual input for 12V model
Power Consumption	6W
PoE budget	120W@48VDC ; 120W@24VDC ; 80W@12VDC
Operating Humidity	5% to 95% (Non-condensing)
Operating Temperature	-20°C~60°C / -4°F~140°F (Standard model) -40°C~75°C / -40°F~167°F (-E model)
Installation	DIN Rail and Wall Mount** Design
EMI &EMS	FCC Class A, CE EN61000-4-2(ESD), CE EN61000-4-3(RS), CE EN61000-4-4(EFT), CE EN61000-4-5(Surge), CE EN61000-4-6(CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-6-2, CE EN55032 Class A, CE EN55024
Stability Testing	IEC60068-2-32(Free fall), IEC60068-2-27(Shock), IEC60068-2-6(Vibration)
Warranty	5 years

**Optional

ORDER INFORMATION

P/N	Model name	Description
8350-922	IPES-0104GT-4-48V	4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -20°C~60°C; 44~56VDC dual input
8350-923	IPES-0104GT-4-48V-E	4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -40°C~75°C; 44~56VDC dual input
8350-924	IPES-0104GT-4-12V	4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -20°C~60°C; 9.5~56VDC dual input
8350-925	IPES-0104GT-4-12V-E	4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -40°C~75°C; 9.5~56VDC dual input

OPTIONAL ACCESSORIES – DIN Rail Power

Model name	Description
NDR-480 Series	480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series	240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series	120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series	75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)

4 10/100TX PoE at/af + 1 10/100/1000T Industrial Unmanaged Switch

**Optional

**Optional

Hardware Specifications

**Optional

OPTIONAL ACCESSORIES – DIN Rail Power

About Lantech

Quality

Contact Us