8 10/100TX + 2 100/1000FX Dual Speed QODC Fiber + 2 GigaT X-coded L2+ 8 PoE at/af EN50155 Managed Ethernet Switch w/enhanced G.8032 Ring

  • EN50155/61373/45545-2 verification
  • IEEE802.3at/af up to 30W per port; PoE management incl. detection and scheduling
  • Optional 12V input can boost to 54V output PoE max. 120W; optional 72V/110V input can step down to 54V output PoE max.80W; optional WV input supports PoE output max.80W
  • Optional bypass in case of power failure, watchdog loss
  • Enhanced G.8032 ring protection < 20ms for single ring. Supports auto mode, enhanced mode, train mode, multi-VLAN and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 16MSTI /RSTP ; support MRP ring**
  • Miss-wiring avoidance & node failure protection; User friendly UI, including auto topology drawing; Complete CLI
  • Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82; Port based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH/SSL, HTTPS, INGRESS/EGRESS ACL L2/L3, TACACS+*, QinQ**, SMS**
  • User friendly UI, including auto topology drawing; Complete CLI
  • Protocol based VLAN** ; IPv4/IPv6 Subnet based VLAN**
  • Built-in environmental monitoring to show switch inside info
  • Optional InstaView** for centralized backup, editing the configuration file and upgrade firmware
  • N-key configurator** for upgrading, auto/editable configuration back up and restoration without computer; good for multiple switches


Lantech IPES-5408DFT (IP67/IP54) is a high performance L2+ (Gigabit uplink) switch with 8 10/100TX + 2 Dual Speed Fiber (Q-ODC) + 2 10/100/1000T (total 12 ports) w/8 PoE 802.3af/at Injectors by M12 provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+*, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ** are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.

DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server**
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.

User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes IPES-5408DFT (IP67/IP54) much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.

Enhanced G.8032 ring, 16 MSTI MSTP; Optional MRP ring
Lantech IPES-5408DFT (IP67/IP54) features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows each spanning tree for each VLAN for redundant links with 16 MSTI.

Optional MRP (Media Redundancy Protocol) can be supported for industrial automation networks.

QoS by VLAN for legacy device
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.

QinQ**, QoS QinQ** and GVRP** supported
It supports the QinQ**, QoS QinQ**, GVRP** for large VLAN segmentation.

IGMPv3, GMRP**, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP**, router port and static multicast forwarding binding by ports for video surveillance application.

PoE +, Advanced PoE management
Lantech IPES-5408DFT (IP67/IP54) supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The advanced PoE management includes PoE detection and scheduling besides the regular PoE per port status. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Per port PoE status can remotely On/Off the power and display information of voltage, current, watt and PoE temperature.

Various input models; 12V/72V/110V/WV dual input; High PoE budget
The Lantech IPES-5408DFT (IP67/IP54) is designed with various dual power input to feed 54V PoE. The 12V model accepts 9~56V input and yields PoE budget 120W (24V input) while 72V model allows 50.4~90V input and yields PoE budget max 80W. The 110V model accepts 43~137.5V input while the WV model allows 16.8V~137.5V input to yield PoE budget max 80W.Featured with relay contact alarm function, the IPES-5408DFT (IP67/IP54) is able to connect with alarm system in case of power failure or port disconnection events.

Re-powered ring restoration, Miss-wiring alert, Loop protection
The IPES-5408DFT (IP67/IP54) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPES-5408DFT (IP67/IP54) is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function (node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

Optional hardware bypass for GigaT
The optional hardware bypass function (not available on 110V model) provides redundant GigaT connection when power or switch fails in a ring or bus structure. The bypass replay is set to bypass the switch to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. The bypass is also activated when detecting the CPU watchdog is ON.

Editable configuration file; InstaView** for mass deployment
Optional N key auto backup, Exported text file

The configuration file can also be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The built-in watchdog design can automatically reboot the switch when CPU is found dead. The optional N-key configurator offers firmware upgrade, auto/editable configuration back up and restoration without computer by adjusting the DIP switch.

With optional InstaView, the configuration files can be mass backup, mass-editable deployed and auto upgrading firmware in batch make maintenance easy

Event email, trap and SMS**; 1DI+1DO
In case of event alarm, the IPES-5408DFT (IP67/IP54) is able to send an email & SMS** text message to pre-defined addresses as well as SNMP Traps out immediately. It provides 1DI and 1DO when disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.

Built-in environmental monitoring
The built-in environmental monitoring can detect switch total PoE load, overall temperature, voltage, total PoE load and current where can send the SNMP traps, email and SMS alert when abnormal.

EN50155, EN50121, EN61373 & EN45545 verification; High ESD protection Lantech IPES-5408DFT (IP67/IP54) features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.

The IPES-5408DFT (IP67/IP54) is designed to meet with critical network environment with IP67/IP54 aluminum enclosure and M12 connectors for water proof. With EN45545-2 Fire & Smoke, and EN50155 & EN61373 verification, the IPGS-5408MGFT-X (IP67/IP54) is best for railway in train/track side, vehicle and mining applications. For more usage flexibilities, IPGS-5408DFT (IP67/IP54) supports wide operating temperature from -40°C to 75°C.

IPES-5408DFT (IP67/IP54)also provides ±2000V EFT and ±6000V ESD contact protection, which can reduce unstable situation caused by power line and Ethernet.

*Future release