EN50155 Multifunction VPN Router + up to 2 LTE 4G + 2 serial ports + 2 Gigabit X-coded Ethernet (incl.1 PD) for Load Balancing VPN, Protocol Gateway, Storage**; WVinput; IP65/54

  •  Up to 2xLTE 4G module(4SIMs) + 2xGigabit X-coded ports(incl. 1PD)
  •  Up to 2 concurrent modems for 3G/4G LTE Link & GPS
  •  Support LTE Cat 6 (APAC & EUNA models) or Cat 12/9/13 (WW model)
  •  Built-in 2 serial ports with 2.5K isolation(RS422/RS485) or w/o isolation(RS232)
  •  VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE
  •  Load Balancing built-in 5 mechanisms
  •  Optional EMMC Flash storage on-board**
  •  Optional eSIM chip enables router with versatile data plans**
  •  Support NAT and Firewall
  •  Support Modbus gateway on serial ports
  •  Galvanic isolation on WV model from 16.8V~137.5V input
  •  Built-in environmental monitoring for router inside info with voltage, current, temperature; LTE graphic signal strength
  •  Editable login page of captive portal for hot-spot application
  •  USB port for backup, restore the configuration file and upgrade firmware; Dual image firmware
  •  IP 65 /54 Aluminum housing for best heat dissipation and preventing moist ingress
  •  EN50155/61373/45545 verification for railway application
 
Datasheet
Hardware Manual

OVERVIEW

Lantech TMR-5002 series is a next generation EN50155 multi-function VPN router up to 2x LTE modem + 2x Gigabit Ethernet(incl.1 PD)+ 2 serial ports that supports advanced function of VPN, Load-balancing, EMMC Flash Storage**, Protocol gateway(Modbus), Storage**, and LTE dual SIM fail-over for on-board / onboard-to-ground applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Dual concurrent LTE design 4G/3G for load-balancing
With dual LTE module design (2L model), 4 SIM card slots, TMR-5002 can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also allocate bandwidth by “ Load Balancing with 8 schemes between multiple WANs.

Optional EMMC Flash storage**
The optional EMMC flash storage on the router can offer 8G/16G/32G capacity.

Optional eSIM**
By replacing physical SIM, optional eSIM chip will allow users to purchase data plans at low prices from local carriers in the world.

Load Balancing with 5 mechanisms for multi-WANs
TMR-5002 supports Load Balancing for LTE/WAN connections. There are five schemes for Load Balancing function:

Pack Algorithm Description
Basic Fixed All traffic will be distributed to a single WAN.
Failover Routes connections through preferred WAN link while others stand-by. Sequentially activating another link if the preferred link fails.
Priority Select the active WAN according to priority.
Weighted Round-Robin Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
Custom Route Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.

2 port serial connection, Modbus gateway
It builds in 2 port serial connection for RS232; RS422/ 485 in which RS422/RS485 has 2.5KV isolation protection. The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

Support various VPN applications and firewall
Besides traditional VPN peer to peer tunneling, TMR-5002 support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number.

Support Routing Protocol: Static route / RIPv2 / OSPF / BGP / EIGRP
Lantech router series supports two routing methods: static routing and dynamic routing. Dynamic routing makes use of RIPv2, OSPF, EIGRP and BGP. The user can either choose one routing method to establish the routing table.

DIDO for alarm & email notice; Event log; Remote Web control
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the TMR-5002 will immediately send email and trap. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot by Web.

Wide range dual input voltage from 16.8-137.5V (WV model)
The TMR-5002 is able to work from dual16.8V ~137.5V DC isolated input (WV model) that is particular good for vehicle, rail train, depot etc applications.

Environmental monitoring for inside router info& alerting; LTE signal strength
The built-in environmental monitoring can detect router ambient temperature, voltage, current where can send the syslog and email when abnormal.

Editable login page of captive portal
The TMR-5002 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

USB port for back up, restore configuration and upgrade firmware Dual image firmware
The built-in USB port can upload/download/upgrade the configurations through USB dongle for router replacement It supports dual-image firmware to choose which one to start

Ruggedized EN50155 design and FCC/CE & E-marking** certificate
The TMR-5002 series is verified with EN50155, EN61373, EN45545 standard with IP65/54 housing. It passed tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for LTE and E-marking** certificate, the TMR-5002 is best for outdoor community, vehicle, power substation, process control automation etc application. For more usage flexibilities, TMR-5002 supports operating temperature from -40°C to 65°C.

*Future Release
**Optional