Switch Cars,
No Reconfiguration.

Switching one car without reconfiguration with Lantech “Train Ring”.

 Lantech “Train Ring” is able to switch multiple cars without reconfiguration at the same time.

Coupling RingTrain Ring
Nodes255255*
Inter-Consist Recovery50 ms50 ms
Intra-Consist Recovery50 ms50 ms
Automatic ConfigurationNoYES

*Train Ring with 255 nodes is available soon
+Maximum number of couple rings: 255
#Each internal ring must consist of minimum 4 Lantech switches

Reduce Cost with High Customer Satisfaction

During current train operation, train cars might need to be separated and reoriented due to more flexible operating requirement. Take MRT for example, it needs more cars during peak hours while only few cars are needed during off-peak hours. A long-distance train route may separate into two shorter trains and heading to different destinations at a junction point. When a train system has higher flexibility, it can utilize the resource and reduces operational costs.

When train cars are switched, re-configure network settings is normally required. Thus, railway operators need to have enough knowledge of Ethernet. This not only increases the cost of labor but also result in additional time.

Train Ring vs. Existing Solutions

Common Rapid Spanning Tree Protocol (RSTP) and Coupling Ring can be applied to rail train network for redundancy of multiple train cars. However, each solution has its own drawbacks such as longer recovery time or non-automatic recovery. Lantech provides a new solution called “Train Ring”, which can automatically recover the network within 50ms without reconfigure the settings!

Lantech Train Ring is evolved from traditional Coupling Ring. It eliminates the setting process, and will automatically identify the primary and backup path dynamically, without any configuration required. Lantech Train Ring allows train operators to rapidly change composition of trains with high efficiency and flexibility. Since all settings are done automatically, configuration errors and cost can be minimized.

All Lantech 3000/5000/6000/7000 industrial managed switches support Train Ring.

Supported Product Lines

Industrial EN50155 Series
(5xxx models)

Industrial Managed Series
(5xxx, 3xxx models)

Industrial Center Switches
(5xxx, 3xxx models)

Industrial PoE Series
(5xxx, 3xxx models)