Industrial Multifunction VPN Router w/up to 3x WiFi 11ac + up to 4 serial ports + 3 Gigabit Ethernet (incl.1 PD) w/Load Balancing, VPN, Protocol Gateway, Storage**; 12V/ 24V input

  •  Up to 3 concurrent WI-FI 11ac and redundancy (3AC model)
  •  Built-in 3 Gigabit Ethernet ports (2LAN+1WAN or 3LAN or 3 WAN) (incl. 1PD)
  •  Dual radio for 802.11ac/a/b/g/n with concurrent 5GHz & 5GHz bands up to 2.6Gbps Wi-Fi bandwidth (3AC model)
  •  MIMO technology 3T3R; SMA type up to 6 external antennas
  •  VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE
  •  Load Balancing built-in 5 mechanism
  •  Support NAT and Firewall
  •  Optional EMMC Flash storage on-board**
  •  Support Modbus gateway
  •  Support Client-base roaming
  •  Supports AP/ Bridge/Client/MESH modes
  •  Support 802.11s Wireless Mesh Network
  •  Support 2 RS422/RS485 ports or 2/4 RS232 ports (RJ45 model only)
  •  Dual Input voltage 9~56VDC (12V model); Dual Input voltage 9~36VDC (24V model)
  •  Wi-Fi graphic signal strength
  •  Vehicle E-marking** certificate (24V model)
  •  ITxPT design w/ ignition function** (24V-IGN model)
  •  Editable login page of captive portal for hot-spot application
  •  USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware
  •  EN50155/61373/45545 verification for railway application (except 24V-IGN model)


Lantech IWAP-3003 series is a next generation industrial multi-function VPN router w/up to 3x 802.11ac Wi-Fi + 3x Gigabit Ethernet (incl.1 PD) + 4 serial ports (RJ45 model only) that supports advanced function of VPN, Load-Balancing, EMMC Flash storage**, Protocol gateway (Modbus), and Wi-Fi roaming. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Support AP/Bridge/Client mode, Mesh roaming
IWAP-3003 supports AP/Bridge/Client mode for different applications. It also supports client-base roaming to swap between the APs in a network.

Built-in Wireless Mesh network(WMN)
IWAP-3003 supports Mesh networks composed of different nodes. The set of SSIDs allow the wireless client to roam freely without the need for complicated account management. With Mesh protocol, it can provide a reliable, scalable, stable and seamless network topology.

IEEE 802.11ac dual band radio up to 2.6Gbps bandwidth
With IEEE 802.11ac capability, IWAP-3003 can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 2.6Gbps bandwidth 1.3GMbps per 802.11ac module). It is also compatible with 802.11b/g/n that can work with 2.4GHz for longer range transmission. The Wi-Fi 11ac supports AP/Bridge/AP Client modes can be diverse for most of wireless application. Working with load-Balancing “Priority” mode, the AP client can enable router to transmit on Wi-Fi with first priority.

Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity

MIMO technology with 3T3R and SMA type connectors
Lantech IWAP-3003 series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable Omni connectors and optional antennas, IWAP-3003 can have better Wi-Fi coverage.

Wireless WMM QoS
IWAP-3003 supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (Wi-Fi multimedia)

Advanced security & 16 SSIDs
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP, AES), 802.1x ensures the best security and active defense against security treads. Lantech IWAP-3003 support up to 16 SSIDs, each SSID has its independent security and encryption.

Load Balancing with 5 mechanism for multi-WANs
IWAP-3003 supports Load Balancing for WAN (client mode) connections. There are five schemes for Load Balancing function:

Pack Algorithm Description
Basic Fixed All traffic will be distributed to a single WAN.
Failover Routes connections through preferred WAN link while others stand-by. Sequentially activating another link if the preferred link fails.
Priority Select the active WAN according to priority.
Weighted Round-Robin Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
Custom Route Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.

4 port serial connection, Modbus gateway
It builds in 4 port serial connection for RS232, RS422, RS485. (RJ45 model only) The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

VPN and firewall
Besides traditional VPN peer to peer tunneling, IWAP-3003 support latest Multi-Site VPN function that is an efficient way for Mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE, IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP / UDP port number.

Support Routing Protocol: Static route / RIPv2 / OSPF / BGP / EIGRP
Lantech router series supports two routing methods: static routing and dynamic routing. Dynamic routing makes use of RIPv2, OSPF, EIGRP and BGP. The user can either choose one routing method to establish the routing table.

Email notice; Event log; Remote Web control
In case of events, the IWAP-3003 will immediately send email and trap. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.

12V/24V input voltage selection: dual 9~56VDC (12V model) or dual 9~36VDC (24V model)
The IWAP-3003 is able to work at dual 9~56VDC (12V model) or dual 9~36VDC (24V model).

Built-in 3 port Gigabit Ethernet
3 port Gigabit Ethernet can be supported as 2LAN+1WAN or 3LAN or 3 WAN models.

Graphic Wi-Fi signal strength
The graphic Wi-Fi signal strength shows connection status at a glance

USB port for back up, restore configuration and upgrade firmware; Dual image firmware
The built-in USB port can upload/download the configuration and upgrade firmware through USB dongle for router replacement. It supports dual-image firmware to choose which one to start.

Ignition Sensing** (24V-IGN model)
Ignition sense allows you to delay power off the router with a designated time delay.

Editable login page of captive portal
The IWAP-3003 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

Ruggedized industrial design and FCC, CE certificate
The IWAP-3003 is designed to meet with outdoor network environment with IP30 (IP43 for M12 model) housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for Wi-Fi, the IWAP-3003 is best for outdoor community, vehicle, and process control automation applications. For more usage flexibilities, IWAP-3003 supports wide operating temperature from -20°C to 70°C or -40°C to 70°C (-E)

EN50155, EN61373 verification; E-marking** certification; ITxPT** design
The IWAP-3003 series is also applicable for railway on-board/track side, vehicle and mining applications for more usage flexibilities. The series is verified with EN50155, EN61373, and EN45545 for railway applications (Except 24V-IGN model). The E-marking certificate (24V model) and ITxPT design (24V-IGN model).

*Future Release