Lantech IMR-3006 series is a next generation industrial multi-function VPN router w/up to 2x LTE modem + 6x Gigabit Ethernet switch + 2 serial ports that supports advanced function of VPN, Load-balancing, Protocol gateway(Modbus), EMMC Flash Storage**, and LTE quad SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.
Dual concurrent LTE design 4G/3G for resilience and aggregation
With dual LTE module design (2L model), 4 SIM card slots, IMR-3006 can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also build aggregated bandwidth as well as have Load Balancing with 8 schemes between multiple WANs.
With one mobile LTE module (1L model), 2 SIM card slots, IMR-3006 provides redundant link between two service providers.
Both GPS and Russian GLONASS systems are supported.
Load Balancing with 5 mechanisms for multi-WANs
IMR-3006 supports Load Balancing for LTE connections. There are five schemes for Load Balancing function:
|Basic||Fixed||Manually route by traffic type through fixed WAN link.|
|Failover||Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.|
|Priority||Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi client>LTE>others|
|Weighted Round-Robin||Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.|
|Custom Route||Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.|
2 port serial connection, Modbus gateway
It builds in 2 port serial connection for RS232, RS422, RS485 in which RS422/RS485 has 2.5KV isolation protection.
The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.
Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity.
By replacing physical SIM, optional eSIM chip will allow users to purchase data plans at low prices from local carriers in the world.
VPN and firewall
Besides traditional VPN peer to peer tunneling, IMR-3006 support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe.
It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE, and NAT for various VPN applications.
The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number.
DIDO for alarm & email notice; Event log; Remote Web control
2 sets of DIDO functions can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the IMR-3006 will immediately send email and trap.
When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.
24V/HV isolated input voltage selection: dual 9V-56VDC (24V model) or single 90~305VAC/120~430VDC (HV model)
The IMR-3006 is able to work from 9VDC to 56VDC (24V model) Or with single high power supply at 90~305VAC / 120~430VDC (HV model).
Environmental monitoring for inside router info& alerting; Graphic LTE signal strength
The built-in environmental monitoring can detect router ambient temperature, voltage, current where can send the syslog and email when abnormal.
The graphic LTE signal strength shows connection status at a glance.
USB port for back up, restore configuration and upgrade firmware; Dual image firmware
The built-in USB port can upload/download the firmware through USB dongle for router replacement
It support dual-image firmware to choose which one to start.
Dual image firmware
It supports dual-image firmware to choose which one to start.
Ruggedized industrial design and FCC, CE & E-marking** certificate
The IMR-3006 is designed to meet with industrial network environment with IP 30 housing. It passed tests under extensive Industrial EMI and environmental vibration and shocks standards.
With CE & FCC radio certification for LTE and E-marking** certificate, the IMR-3006 is best for outdoor community, vehicle, process control automation etc. For more usage flexibilities, IMR-3006 supports wide operating temperature from -40°C to 65°C.
Ignition sense allows you to delay power off your Ethernet switch with a designated time delay.
Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network aggregation deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.