8 10/100TX PoE at/af Industrial Ethernet Unmanaged Switch ; 24V/48V input models

  •  Support IEEE802.3at/af up to 30W per port
  •  Dual power input: Dual 9~36VDC (24V model); 45V~56VDC input (48V model)
  •  Galvanic isolation protection (power input /Ethernet port to case ground)
  •  Max PoE budget 240W at 48V, 80W at 24V
  •  Efficient PoE configuration when ignition off (-IGN model)
  •  E-marking* certificate for vehicle application (24V model)
  •  w/ignition function (24V-IGN model)
 
Datasheet
Manual

OVERVIEW

Lantech I(P)ES-0008C is a high performance all 8 10/100TX industrial Ethernet switch with w/8 PoE 802.3af/at ports.

Galvanic isolation for dual 48V, 24V input with max PoE budget
The IPES-0008C supports IEEE802.3at/af standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The IPES-0008C-24V accepts power input 9~36VDC with IEEE802.3at/af standard and feed up to 30W per PoE port with maximum 80W@24V and 240W@48V output (at dual input). PoE 48V model accepts 45~56VDC power input and can feed 48V output for PoE feeding in vehicle at max 240W @48V input.

Efficient PoE configuration when ignition off
Supports optional PoE feeding OFF timer (1/5/10mins or others) at ignition off mode to prevent car battery drain-out. (-IGN model)

E-marking* certificate, ISO 7637-2 compliant High reliability and extended working temperature
Lantech I(P)ES-0008C provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C. The E-marking* certificate makes it the most suitable PoE switch for bus, carriage, other vehicles application as well as for industrial areas where the power source is limited with 12V but has demand of IP surveillance or VoIP applications. Only 24VDC input system is applicable for E-mark approval. The 24V model is also compliant with ISO 7637-2 which protects switch from being damaged by high voltage that could be found at vehicle cranky start.