IPMR-3004

Industrial Multifunction VPN Router w/up to 2 LTE 4G + 2 serial ports + 4 Gigabit Ethernet PoE Switch + 2WAN/2LAN ports w/ Load Balancing, VPN, Protocol Gateway, Storage**; 24V input

  • Up to 2 concurrent mobility for 3G/4G LTE Link&GPS(2L model/4 SIMs)
  • Built-in 4 Gigabit PoE at/af Switch with budget 80W@12V/24V/48V
  • VPN router for Multi-site VPN, OpenVPN, L2TP, IPSec, PPTP**
  • Load Balancing** support 8 mechanism
  • Support NAT and Firewall
  • Support Modbus or DNP3** gateway on serial ports
  • Support 2 RS422/485 ports with 2.5KV isolation or 2x RS232 ports
  • Optional storage microSD** for storage backup or multi-media content suit with load-balancing route.
  • Input voltage selection 9~56VDC (24V model)
  • Environmental monitoring for router inside info with voltage, current, temperature and total PoE load; LTE graphic signal strength & TX/RX rate display
  • Editable login page of captive portal for hot-spot application
  • USB port to backup, restore the configuration file and upgrade firmware*; Dual image firmware*

 

 

Lantech IPMR-3004 series is a next generation industrial multi-function VPN router w/up to 2x LTE modem + 4x Gigabit Ethernet PoE switch + 2WAN/2LANs + 2 serial ports that supports advanced function of VPN, Load-balancing** (Basic & Full package), Protocol gateway (Modbus,DNP3**), Storage**, LTE quad SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Dual concurrent LTE design 4G/3G for load-balancing
With dual LTE module design (2L model), 4 SIM card slots, it can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also allocate bandwidth by “ Load Balancing** with 8 schemes between multiple WANs.

With one mobile LTE module (1L model), 2 SIM card slots, IPMR-3004 provides redundant link between two service providers.

Both GPS and Russian GLONASS systems are supported.

Load Balancing** with 8 mechanisms for multi-WANs (premium license)
IPMR-3004 supports Load Balancing** for LTE connections. There are eight schemes for Load Balancing** function:

Pack Algorithm Description
Standard Fixed Manually route by traffic type through fixed WAN link.
Basic Package Failover Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.
Priority Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi  client>LTE>others
Weighted Round-Robin Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
Custom Route Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.
Full Package (incl. basic package) Sticky Session* Binding all connections in an application session to particular WAN link to ensure all connections in the session are routed to the same WAN link , that is suitable for security services like online payment etc.
Smallest Load* Routes connections through the WAN link with highest free bandwidth ratio.
The ratio = 1 – (traffic load / the capability of a WAN link).
The traffic load could be defined by downstream, upstream or total traffic
Fastest* Routes connections through the WAN link with lowest latency time.

2 port serial connection, Modbus / DNP3** gateway
It builds in 2 port serial connection for RS232, RS422, 485 in which RS422/485 has 2.5KV isolation protection.

The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

It also can support optional DNP3** gateway over serial ports

VPN and firewall
Besides traditional VPN peer to peer tunneling, IPMR-3004 support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe.

It supports Multi-Site VPN, Open VPN, L2TP, IP sec and PPTP** for various VPN applications.

The built-in Layer-4 firewall includes DoS**, IP address filter / Mac address filter* / TCP/UDP port.

DIDO for alarm & email notice; Event log; Remote Web/SMS** control
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the IPMR-3004 will immediately send email and trap.

When the router is at remote area with limited access, Web/SMS** control can help to get router status or remotely reboot.

Wide range input voltage from 9V-56VDC; Built-in 4 port PoE at/af switch with 80W@12V /24V/48V
The IPMR-3004 is able to work from 9VDC to 56VDC for PoE at/af with PoE budget 80W@12V /24V/48V that is particular good for vehicle, rail train, depot etc. application.

Environmental monitoring for inside router info& alerting; Graphic LTE signal strength and TX/RX rate display
The built-in environmental monitoring can detect router ambient temperature, voltage, current and total PoE load where can send the SNMP traps Syslog, email** and SMS** alert when abnormal.

The graphic LTE signal strength and TX/RX rate display shows connection status at a glance

Cloud/Host based InstaView**/InstaAir** software for router / fleet management and monitoring
Lantech InstaView** can offer fixed location router central management, configuration, and monitoring via secured Cloud or Host server. InstaAir** can offer fleet router management including the GPS tracking, remote configuration/upgrade, monitoring/alerting and report function

USB port for back up, restore configuration and upgrade firmware*; Dual image firmware*
The built-in USB port can upload/download the firmware through USB dongle for router replacement

It support dual-image firmware* to choose which one to start.

Optional USB to microSD** for storage backup or multimedia resources
The optional internal USB to microSD** can have data backup or pre-store the multimedia resources for content application. User can designate the route via load-balancing** scheme to upload/download the data per request.

Editable login page of captive portal
The IPMR-3004 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

Ruggedized industrial design and FCC*, CE*& E-marking** certificate
The IPMR-3004 is designed to meet with industrial network environment with IP 30 housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards.

With CE & FCC radio certification for LTE and E-marking** certificate, the IPMR-3004 is best for outdoor community, vehicle, process control automation etc. For more usage flexibilities, IPMR-3004 supports wide operating temperature from -20°C to 75°C or -40°C to 75°C(-E)

*Future Release
**Optional