Industrial Multifunction VPN Router Managed Switch w/up to 2x WiFi 11ac + 2 serial ports** + 4 Gigabit Ethernet + 2 WAN Dual Speed SFP switch (incl. 4 PoE) w/Load Balancing, VPN, Protocol Gateway, Storage**; 24V input
- Up to 2 concurrent WI-FI 11ac and redundancy(2AC model)
- Built-in 4 Gigabit Ethernet ports + 2 WAN Dual Speed SFP managed switch including 4 PoE at/af w/budget 80W
- Managed Switch functions cover port management, QOS, VLAN, multicast, redundant ring and security function
- Dual radio for 802.11ac/a/b/g/n with concurrent 5GHz & 5GHz bands up to 2.6Gbps Wi-Fi bandwidth(2AC model)
- MIMO technology 3T3R; SMA type up to 6 external antennas
- Support Client-base roaming
- Supports AP/ Bridge/ Client/ MESH modes
- Support 802.11s Wireless Mesh Network
- VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE
- Load Balancing built-in 5 mechanisms
- Support NAT and Firewall
- Optional EMMC Flash storage on-board**
- Support 2 RS422/RS485 ports with 2.5KV isolation or 2x RS232 ports
- Dual input voltage 9V to 56VDC (24V model) for vehicle, station and process automation applications
- Vehicle E-marking** certificate
- Wi-Fi graphic signal strength
- Editable login page of captive portal for hot-spot application
- USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware
- Environmental monitoring for router inside info with voltage, current, temperature and total PoE load; Wi-Fi graphic signal strength
- ITxPT compliant w/ ignition function**
Lantech IPWAP-3004DF series is a next generation industrial multi-function VPN router managed switch w/up to 2x 802.11ac Wi-Fi + 4x Gigabit Ethernet+ 2 WAN Dual Speed SFP incl. 4 PoE ports + 2 serial ports** that supports advanced function of VPN, Load-balancing, EMMC Flash storage** , and WiFi roaming.The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.
Support AP/Bridge/Client mode, Mesh roaming
IPWAP-3004DF supports AP/Bridge/Client mode for different applications.
It also supports client-base roaming to swap between the APs in a network.
Built-in Wireless mesh network（WMN）
IPWAP-3004DF supports mesh network composed of different nodes. The set of SSIDs allow the wireless client to roam freely without the need for complicated account management. With Mesh protocol, it can provide a reliable, scalable, stable and seamless network topology.
IEEE 802.11ac dual band radio up to 2.6Gbps bandwidth
With IEEE 802.11ac capability, IPWAP-3004DF can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 2.6Gbps bandwidth 1.3GMbps per 802.11ac module). It is also compatible with 802.11b/g/n that can work with 2.4GHz for longer range transmission. The Wi-Fi 11ac supports AP/BRIDGE/AP Client modes can be diverse for most of wireless application. Working with Load-balancing “Priority” mode, the AP client can enable router to transmit on Wi-Fi with first priority.
Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity
MIMO technology with 3T3R and SMA type connectors
Lantech IPWAP-3004DF series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable Omni connectors and optional antennas, IPWAP-3004DF can have better Wi-Fi coverage.
Managed switch Function
W/ port managed functions, QOS, VLAN, Multicast, Redundant protection, security
Wireless WMM QoS
IPWAP-3004DF supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (Wi-Fi multimedia)
Advanced security & 16 SSIDs
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP, AES), 802.1x ensures the best security and active defense against security treads. Lantech IPWAP-3004DF support up to 16 SSIDs, each SSID has its independent security and encryption.
Load Balancing with 5 mechanisms for multi-WANs
IPWAP-3004DF supports Load Balancing for LTE/WAN connections. There are five schemes for Load Balancing function:
|Basic||Fixed||Manually route by traffic type through fixed WAN link.|
|Failover||Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.|
|Priority||Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi client>LTE>others|
|Weighted Round-Robin||Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.|
|Custom Route||Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.|
2 port serial connection
It builds in 2 port serial connection for RS232, RS422, RS485 in which RS422/RS485 has 2.5KV isolation protection.
VPN and firewall
Besides traditional VPN peer to peer tunneling, IPWAP-3004DF support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number
DIDO for alarm & email notice; Event log; Remote Web control
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the IPWAP-3004DF will immediately send email and trap. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.
Wide range input voltage from 9V-56VDC (24V model) ; Built-in 4 port Gigabit Ethernet
The IPWAP-3004DF is able to work from 9VDC to 56VDC (24V model) that is particular good for vehicle, rail train, depot etc. application.
Graphic Wi-Fi signal strength
The graphic Wi-Fi signal strength shows connection status at a glance.
USB port for back up, restore configuration and upgrade firmware; Dual image firmware
The built-in USB port can upload/download the configuration and upgrade firmware through USB dongle for router replacement. It supports dual-image firmware to choose which one to start.
Ignition sense allows you to delay power off the router with a designated time delay.
Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network access deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.
Editable login page of captive portal
The IPWAP-3004DF supports editable captive portal function that allows administrator to force end-users redirect to authentication page.
Ruggedized industrial design and FCC, CE & E-marking** certificate
The IPWAP-3004DF is designed to meet with outdoor network environment with IP 30 housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for Wi-Fi and E-marking** certificate. The IPWAP-3004DF is best for outdoor community, vehicle, process control automation etc application. For more usage flexibilities, IPWAP-3004DF supports wide operating temperature from -20°C to 70°C or -40°C to 70°C (-E)