Industrial Multifunction VPN Router w/up to 2x WiFi 11ac + 2 serial ports** + 4 Gigabit Ethernet + 2 WAN Dual Speed SFP w/Load Balancing, VPN, Protocol Gateway, Storage**; 24V/HV input

  •  Up to 2 concurrent WI-FI 11ac and redundancy(2AC model)
  •  Built-in 4 Gigabit Ethernet ports + 2 WAN Dual Speed SFP port
  •  Managed Switch functions cover port management, QOS, VLAN, multicast, redundant ring and security function
  •  Dual radio for 802.11ac/a/b/g/n with concurrent 5GHz & 5GHz bands up to 2.6Gbps Wi-Fi bandwidth(2AC model)
  •  MIMO technology 3T3R; SMA type up to 6 external antennas
  •  Support roaming with 802.11k & v
  •  Supports AP/ Bridge/ Client/ MESH modes
  •  Support 802.11s Wireless Mesh Network
  •  Air teaming** for Wi-Fi high-sustainability and aggregated bandwidth
  •  VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, PPTP**, L2 over GRE , IPGRE
  •  Load Balancing built-in 5 mechanisms
  •  Support NAT and Firewall
  •  Optional EMMC Flash storage on-board**
  •  Support 2 RS422/RS485 ports with 2.5KV isolation or 2x RS232 ports
  •  Dual Input voltage 9~60VDC (24V model); Single isolated input power 90~305VAC/120~430VDC (HV model)
  •  Vehicle E-marking* certificate
  •  Wi-Fi graphic signal strength
  •  Editable login page of captive portal for hot-spot application
  •  USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware*
  •  Environmental monitoring for router inside info with voltage, current, temperature; Wi-Fi graphic signal strength
  •  ITxPT compliant w/ ignition function*
 
 

Lantech IWAP-3004DF series is a next generation industrial multi-function VPN router Managed switch w/up to 2x 802.11ac Wi-Fi + 4x Gigabit Ethernet+ 2 WAN Dual Speed SFP ports+ 2 serial ports** that supports advanced function of VPN, Load-balancing**(Basic & Full Package), EMMC Flash storage** , and WiFi roaming.The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Support AP/Bridge/Client mode, Mesh w/802.11k, v roaming
IWAP-3004DF supports AP/Bridge/Client mode for different applications. Client mode supports PMK** Caching and pre-authentication.

It also supports 802.11k, v roaming to allow encryption keys to be stored on all of the APs in a network.

Built-in Wireless mesh network(WMN)
IWAP-3004DF supports mesh network composed of different nodes. The set of SSIDs allow the wireless client to roam freely without the need for complicated account management. With Mesh protocol, it can provide a reliable, scalable, stable and seamless network topology.

IEEE 802.11ac dual band radio up to 2.6Gbps bandwidth
With IEEE 802.11ac capability, IWAP-3004DF can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 2.6Gbps bandwidth 1.3GMbps per 802.11ac module). It is also compatible with 802.11b/g/n that can work with 2.4GHz for longer range transmission. The Wi-Fi 11ac supports AP/BRIDGE/AP Client modes can be diverse for most of wireless application. Working with load-balancing** “Priority” mode, the AP client can enable router to transmit on Wi-Fi with first priority.

Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity

Air teaming** for wireless high-sustainability and aggregated bandwidth
The innovative Air-teaming protection can combines multiple wireless links to achieve both high-sustainability and aggregated bandwidth. High sustainability can keep the network traffic alive even one link is down or severely interfered. Aggregated bandwidth can bind two link channels to provide the maximum throughput.

MIMO technology with 3T3R and SMA type connectors
Lantech IWAP-3004DF series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable Omni connectors and optional antennas, IWAP-3004DF can have better Wi-Fi coverage.

Managed switch Function
W/ port managed functions, QOS, VLAN, Multicast, Redundant protection, security

Wireless WMM QoS
IWAP-3004DF supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (Wi-Fi multimedia)

Advanced security & 16 SSIDs
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP, AES), 802.1x ensures the best security and active defense against security treads. Lantech IWAP-3004DF support up to 16 SSIDs, each SSID has its independent security and encryption.

Load Balancing with 8 mechanisms for multi-WANs (premium license)
IWAP-3004DF supports Load Balancing for LTE/WAN connections. There are eight schemes for Load Balancing function:

Pack Algorithm Description
Basic Package Fixed Manually route by traffic type through fixed WAN link.
Failover Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.
Priority Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi  client>LTE>others
Weighted Round-Robin Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
Custom Route Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.
Full Package** (incl. basic package) Sticky Session* Binding all connections in an application session to particular WAN link to ensure all connections in the session are routed to the same WAN link , that is suitable for security services like online payment etc.
Smallest Load* Routes connections through the WAN link with highest free bandwidth ratio.
The ratio = 1 – (traffic load / the capability of a WAN link).
The traffic load could be defined by downstream, upstream or total traffic
Fastest* Routes connections through the WAN link with lowest latency time.

2 port serial connection
It builds in 2 port serial connection for RS232, RS422, RS485 in which RS422/RS485 has 2.5KV isolation protection.

VPN and firewall
Besides traditional VPN peer to peer tunneling, IWAP-3004DF support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, PPTP**, L2 over GRE , IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number

DIDO for alarm & email notice; Event log; Remote Web control
2 sets of optional DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the IWAP-3004DF will immediately send email and trap. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.

24V/HV isolated input voltage selection: dual 9V-60VDC (24V model) or single 90~305VAC/120~430VDC (HV model)
The IWAP-3004DF is able to work from 9VDC to 60VDC (24V model). Or with single high power supply at 90~305VAC / 120~430VDC (HV model).

Graphic Wi-Fi signal strength
The graphic Wi-Fi signal strength shows connection status at a glance.

USB port for back up, restore configuration and upgrade firmware; Dual image firmware*
The built-in USB port can upload/download the configuration and upgrade firmware through USB dongle for router replacement. It supports dual-image firmware* to choose which one to start.

Ignition Sensing*
Ignition sense allows you to delay power off the router with a designated time delay.

Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network access deployment. It delivers port management, VLAN, QoS, multicast, redundant ring and security functions.

Editable login page of captive portal
The IWAP-3004DF supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

Ruggedized industrial design and FCC*, CE* & E-marking** certificate
The IWAP-3004DF is designed to meet with outdoor network environment with IP 30 housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for Wi-Fi and E-marking** certificate. The IWAP-3004DF is best for outdoor community, vehicle, process control automation etc application. For more usage flexibilities, IWAP-3004DF supports wide operating temperature from -20°C to 70°C or -40°C to 70°C(-E)

*Future Release
**Optional