EN50155 Multifunction VPN Router w/up to 2x WiFi 11ac + 2 serial ports** + 6 Gigabit X-coded Ethernet Switch w/Load Balancing, Protocol Gateway, VPN, Storage**; WV input
- Built-in 6 Gigabit X-coded Ethernet switch
- Up to 2 WIFI radio for 802.11ac/a/b/g/n with 5GHz or 2.4GHz
- Support WIFI 802.11e traffic prioritization and WMM
- MIMO technology 3T3R up to 6 antenna; Detachable antenna connectors with 6 SMA/QMA** type incl. 3 WIFI
- Support Client-base roaming
- Supports AP/ Bridge/ Client/ MESH modes
- Support 802.11s Wireless Mesh Network
- Advanced wireless security WEP64/128bits/ WPA/ WPA-PSK (TKIP,AES)/ WPA2/ WPA2-PSK (TKIP,AES)
- VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE
- Load Balancing built-in 5 mechanisms
- Optional EMMC Flash storage on-board**
- Support NAT and Firewall
- Optional support Modbus gateway on serial ports
- Optional Support 2 RS422/RS485 ports with 2.5KV isolation or 2x RS232 ports
- Optional 2 GT smart bypass protection
- Galvanic isolation on WV model from 16.8V~137.5V input
- Environmental monitoring for router inside info with voltage, current, temperature; Wi-Fi graphic signal strength
- Editable login page of captive portal for hot-spot application
- USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware
Lantech TWAP-5006 series is a next generation EN50155 multi-function VPN router w/ up to 2 x 802.11ac Wi-Fi + 6 Gigabit X-coded Ethernet switch + 2 serial ports** that support advanced VPN function, Load-balancing, Protocol Gateway, EMMC Flash Storage** and WiFi roaming for on-board / onboard-to-ground applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.
Support AP/Bridge/Client mode, Mesh roaming
TWAP-5006 supports AP/Bridge/Client mode for different applications.
It also supports client-base roaming to swap between the APs in a network.
Built-in Wireless mesh network（WMN）
TWAP-5006 supports mesh network composed of different nodes. The set of SSIDs allow the wireless client to roam freely without the need for complicated account management. With Mesh protocol, it can provide a reliable, scalable, stable and seamless network topology.
MIMO technology with 3T3R and standard SMA / optional QMA type connectors
Lantech TWAP-5006 series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable antenna SMA/QMA** connectors and optional antennas, TWAP-5006 can have better Wi-Fi coverage.
Wireless WMM QoS
TWAP-5006 supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (WIFI multimedia)
Advanced security & 16 SSIDs
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP, AES), 802.1x ensures the best security and active defense against security treads. Lantech TWAP-5006 support up to 16 SSIDs, each SSID has its independent security and encryption.
Load Balancing with 5 mechanisms for multi-WANs
TWAP-5006 supports Load Balancing for WAN connections. There are five schemes with Load balancing function:
|Basic||Fixed||Manually route by traffic type through fixed WAN link.|
|Failover||Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.|
|Priority||Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi client>LTE>others|
|Weighted Round-Robin||Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.|
|Custom Route||Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.|
Optional 2 port serial connection, Modbus gateway
Optional 2 port serial connection for RS232; RS422/ 485 in which RS422/RS485 has 2.5KV isolation protection.
The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.
Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity.
VPN and firewall
Besides traditional VPN peer to peer tunneling, TWAP-5006 support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe.
It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, L2 over GRE , IPGRE, and NAT for various VPN applications.
The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number.
Optional 2 GT smart bypass protection
The optional bypass relay is set to bypass the router to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the router is completely booting up when power is back to avoid another network lost. Also it will be activated when detecting the router is hanged or link down.
DIDO for alarm & email notice; Event log; Remote Web control
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the TWAP-5006 will immediately send email and trap. The event log can be sent via syslog, emails** or trigger the alarm relay. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot by Web
Wide range dual input voltage from 16.8-137.5V (WV model)
The TWAP-5006 is able to work from dual 16.8V ~137.5V DC isolated input (WV model) that is particular good for vehicle, rail train, depot etc applications.
Environmental monitoring for inside router info& alerting; Graphic WI-FI signal strength
The built-in environmental monitoring can detect router ambient temperature, voltage, current where can send the syslog, and email alert when abnormal.
The graphic WI-FI signal strength shows connection status at a glance.
Dual image firmware
It supports dual-image firmware to choose which one to start.
It supports dual-image firmware to choose which one to start.
Editable login page of captive portal
The TWAP-5006 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.
USB port for back up, restore configuration and upgrade firmware
The built-in USB port can upload/download the configuration and upgrade firmware through USB dongle for router replacement
Ruggedized EN50155 design and FCC/CE & E-marking** certificate
The TWAP-5006 series is verified with EN50155, EN61373, EN45545 standard with IP65/54 housing. It passed tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE* & FCC* radio certification for Wi-Fi and E-marking** certificate, the TWAP-5006 is best for outdoor community, vehicle, power substation, process control automation etc. For more usage flexibilities, TWAP-5006 supports operating temperature from -20°C to 70°C or -40°C to 70°C(-E).
Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network aggregation deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.