Lantech IES-0008B is a high performance all 8 10/100TX industrial Ethernet switch with 12V or 24V input range selection.
Galvanic isolation for dual 24V, 12V input models
The IES-0008B-12V accepts power input 9~36VDC and is compliant with ISO 7637-2 Pulse 5a which protects switch from being damaged by high voltage that could be found at vehicle cranky start.
24V model can accept dual 9-60VDC power input.
E-marking certificate*(-12V model), High reliability and extended working temperature
Lantech IES-0008B provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, Wireless backhaul, Semi-conductor factory and assembly lines.
The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
The E-marking certificate makes it the most suitable switch for bus, carriage, other vehicles application as well as for industrial areas. (-12V model)
- 8 10/100TX industrial Ethernet switch (Total 8 Ports Switch)
- Dual 9V~36VDC power input for 12V model with ISO7637-2 compliance
- Dual 9V~60VDC power input for 24V model
- Back-plane (Switching Fabric): 1.6Gbps
- Provides EFT protection ±2000 VDC for power line.
- Supports ±6000 VDC Ethernet ESD protection
- Galvanic isolation between power input and case ground; between Ethernet port and case ground; between power input and Ethernet port
- E-marking* certificate for vehicle application (-12V model)
- Relay alarm output for power fail and alarm
- IP30 metal housing with DIN rail and Wall-mount** design
|Standards||IEEE802.3 10Base-T Ethernet
IEEE802.3x Flow Control and Back Pressure
|Switch Architecture||Back-plane (Switching Fabric): 1.6Gbps|
|Transfer Rate||14,880pps for Ethernet port
148,800pps for Fast Ethernet port
|Mac Address||16K MAC address table|
|Connectors||10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X function
Power & P-Fail connector: 1 x 6-pole terminal block
|Network Cable||10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
|LED||Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red);
Ethernet port: Link/Activity (Green)
|Operating Humidity||5% ~ 95% (Non-condensing)|
|Operating Temperature||-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F(-E model)
|Storage Temperature||-40°C~85°C / -40°F~185°F|
|Power Supply||9V~36VDC(12V model); 9V~60VDC(24V model)|
|Galvanic Isolation||Between power input and case ground
Between Ethernet port and case ground
Between power input and Ethernet port
|Case Dimension||Metal case. IP-30,
43 (W) x 105 (D) x 152 (H) mm
|Installation||DIN Rail and Wall Mount** Design|
|Relay Alarm||Provides one relay output for power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V
|EMI & EMS||FCC Class A,
CE EN55032, CE EN55024, CE EN61000-4-2, CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-4-6, CE EN61000-4-8
|Stability Testing||IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
|Vehicle certificate||E-4 marking* (-12V model)|
|8351-118||IES-0008B-12V||8 10/100TX Industrial Ethernet Switch,dual 9V~60VDC input ; compliant with ISO7637-2; -20°C to 60°C|
|8351-119||IES-0008B-12V-E||8 10/100TX Industrial Ethernet Switch,dual 9V~60VDC input ; compliant with ISO7637-2; -40°C to 75°C|
OPTIONAL ACCESSORIES – DIN Rail Power
|MDR-40 Series||40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)|
|MDR-20 Series||20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)|