Industrial Multifunction VPN Router w/up to 2x WiFi 11ac + up to 2 LTE 4G + 4 serial ports + 3 Gigabit Ethernet w/Load Balancing**, VPN, Protocol Gateway, Storage**; 24V / HV input

  •  Up to 2 concurrent WIFI 11ac and redundancy (1L-2AC model)
  •  Up to 2 concurrent modems for 3G/4G LTE Link & GPS (2L-1AC model/4 SIMs)
  •  Built-in 3 Gigabit Ethernet ports (2LAN+1WAN or 3LAN or 3 WAN)
  •  Dual radio for 802.11ac/a/b/g/n with concurrent 5GHz & 5GHz bands up to 2.6Gbps Wi-Fi bandwidth (2AC model)
  •  MIMO technology 3T3R; SMA type up to 6 external antennas
  •  Air teaming** for Wi-Fi high-sustainability and aggregated bandwidth
  •  VPN router for Multi-site VPN, OpenVPN, L2TP over IPsec, IPsec, PPTP**, L2 over GRE, IPGRE
  •  Load Balancing built-in 5 mechanism
  •  Optional EMMC Flash storage on-board**
  •  Support roaming with 802.11k & v
  •  Supports AP/Bridge/Client/MESH modes
  •  Support 802.11s Wireless Mesh Network
  •  Support NAT and Firewall
  •  Support Modbus gateway
  •  Support 2 RS422/RS485 ports with 2.5KV isolation or 2/4x RS232 ports (RJ45 model only)
  •  Dual input range from 9V to 60VDC (24V model); Single input power 90~305VAC/120~430VDC (HV model) (RJ45 model)
  •  Vehicle E-marking* certificate
  •  Wi-Fi & LTE graphic signal strength
  •  Editable login page of captive portal for hot-spot application
  •  USB port to backup, restore the configuration file and upgrade firmware; Dual image firmware*
  •  ITxPT compliant w/ ignition function*
 

Lantech IWMR-3003 series is a next generation industrial multi-function VPN router w/up to 2x 802.11ac Wi-Fi + up to 2x LTE modem + 3 x Gigabit Ethernet +4 serial ports (RJ45 model only) that supports advanced function of VPN, Load-Balancing (Basic & Full Package), EMMC Flash Storage**, Protocol gateway(Modbus) , Wi-Fi roaming and LTE quad SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Dual concurrent LTE design 4G/3G for load-balancing
With dual LTE module design (2L model), 4 SIM card slots, IWMR-3003 can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also allocate bandwidth by “Load Balancing with 8 schemes between multiple WANs. With one mobile LTE module, 2 SIM card slots, IWMR-3003 provides redundant link between two service providers. Both GPS and Russian GLONASS systems are supported.

Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity.

IEEE 802.11ac dual band radio up to 2.6Gbps bandwidth
With IEEE 802.11ac capability, IWMR-3003 can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 2.6Gbps bandwidth (1.3Gbps per 1AC). It is also compatible with 802.11g/n that can work with 2.4GHz for longer range transmission. The Wi-Fi 11ac supports AP/Bridge/AP Client modes can be diverse for most of wireless application. Working with load-balancing “Priority” mode, the AP client can enable router to transmit on Wi-Fi with first priority.

Air teaming** for wireless high-sustainability and aggregated bandwidth
The innovative Air-teaming protection can combine multiple wireless links to achieve both high-sustainability and aggregated bandwidth. High sustainability can keep the network traffic alive even one link is down or severely interfered. Aggregated bandwidth can bind two link channels to provide the maximum throughput.

MIMO technology with 3T3R and SMA type connectors
Lantech IWMR-3003 series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable omni connectors and optional antennas, IWMR-3003 can have better Wi-Fi coverage.

Support AP/Bridge/Client mode, Mesh w/802.11k, v roaming
IWMR-3003 supports AP/Bridge/Client mode for different applications. Client mode supports PMK** Caching and pre-authentication. It also supports 802.11k, v roaming to allow encryption keys to be stored on all APs in a network.

Built-in Wireless Mesh network(WMN)
IWMR-3003 supports Mesh network composed of different nodes. The set of SSIDs allow the wireless client to roam freely without the need for complicated account management. With Mesh protocol, it can provide a reliable, scalable, stable and seamless network topology.

Wireless WMM QoS
IWMR-3003 supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (Wi-Fi multimedia)

Advanced security & 16 SSIDs
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP, AES), 802.1x ensures the best security and active defense against security treads. Lantech IWMR-3003 support up to 16 SSIDs, each SSID has its independent security and encryption.

Load Balancing with 8 mechanism for multi-WANs (premium license pack)
IWMR-3003 supports Load Balancing for LTE/WAN (client mode) connections. There are eight schemes for Load Balancing function:

Pack Algorithm Description
Basic Package Fixed Manually route by traffic type through fixed WAN link.
Failover Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.
Priority Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi  client>LTE>others
Weighted Round-Robin Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
Custom Route Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.
Full Package** (incl. basic package) Sticky Session* Binding all connections in an application session to particular WAN link to ensure all connections in the session are routed to the same WAN link , that is suitable for security services like online payment etc.
Smallest Load* Routes connections through the WAN link with highest free bandwidth ratio.
The ratio = 1 – (traffic load / the capability of a WAN link).
The traffic load could be defined by downstream, upstream or total traffic
Fastest* Routes connections through the WAN link with lowest latency time.

4 port serial connection, Modbus gateway
It builds in 4 port serial connection for RS232, RS422, RS485 in which RS422/RS485 has 2.5KV isolation protection. (RJ45 model only) The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

VPN and firewall
Besides traditional VPN peer to peer tunneling, IWMR-3003 support latest Multi-Site VPN function that is an efficient way for Mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, OpenVPN, L2TP over IPsec, IPsec, PPTP**, L2 over GRE, IPGRE, and NAT for various VPN applications. The built-in Layer-4 firewall includes DDoS, IP address filter / Mac address filter / TCP/UDP port number

DIDO** for alarm & email notice; Event log; Remote Web control
2 sets of optional DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the IWMR-3003 will immediately send email and trap. When the router is at remote area with limited access, Web control can help to get router status or remotely reboot.

24V/HV input voltage selection: dual 9V-60VDC (24V model) or single 90~305VAC/120~430VDC (HV model)
The IWMR-3003 is able to work from 9VDC to 60VDC (24V model) Or with single high power supply at 90~305VAC / 120~430VDC (HV model). (RJ45 model only)

Built-in 3 port Gigabit Ethernet
3 port Gigabit Ethernet can be supported as 2LAN+1WAN or 3LAN or 3 WAN models

Graphic Wi-Fi & LTE signal strength
The graphic Wi-Fi & LTE signal strength shows connection status at a glance.

USB port for back up, restore configuration and upgrade firmware; Dual image firmware*
The built-in USB port can upload/download the configuration through USB dongle for router replacement. It supports dual-image firmware* to choose which one to start.

Ignition Sensing*
Ignition sense allows you to delay power off the router with a designated time delay.

Editable login page of captive portal
The IWMR-3003 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

Ruggedized industrial design and FCC*, CE* & E-marking** certificate
The IWMR-3003 is designed to meet with outdoor network environment with IP30 (IP43 for M12 model) housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for Wi-Fi and LTE and E-marking** certificate, the IWMR-3003 is best for outdoor community, vehicle, process control automation etc. application. For more usage flexibilities, IWMR-3003 supports wide operating temperature from -40°C to 65°C

EN50155, EN61373 verification*
The IWMR-3003 series is also applicable for railway on-board/track side, vehicle and mining applications for more usage flexibilities.

*Future Release
**Optional